Products

Microcrystalline Cellulose is purified, partially depolymerized cellulose prepared by treating alpha cellulose obtained as a pulp from fibrous plant material with mineral acids. Several grades of Avicel® PH MCC are available varying in particle size distribution, density and moisture content. Microcrystalline cellulose (MCC) is most often used as a filler, flow aid, binder, and compression aid for tablets and capsules. Endurance® VE-050 has a typical average particle size of 50 µm. It is primarily used for wet granulation, direct compression, and extrusion/spheronization for dietary supplement applications.

Microcrystalline Cellulose is purified, partially depolymerized cellulose prepared by treating alpha cellulose obtained as a pulp from fibrous plant material with mineral acids. Several grades of Avicel® PH MCC are available varying in particle size distribution, density and moisture content. Avicel® PH microcrystalline cellulose (MCC) is most often used as a filler, disintegrant, flow aid, and dry binder for tablets and capsules. Avicel® PH-301 has a typical average particle size of 50 µm with a high bulk density of approximately 0.4 g/cc, compared to 0.3 g/cc for most other Avicel® grades. Avicel® PH-301 is primarily used for high shear wet granulation and direct compression. The high bulk density provides increased flowability resulting in improved blending characteristics and tablet uniformity. The high density also helps improve consistency and throughput of the capsule filling process.

Microcrystalline Cellulose is purified, partially depolymerized cellulose prepared by treating alpha cellulose obtained as a pulp from fibrous plant material with mineral acids. Several grades of Avicel® PH MCC are available varying in particle size distribution, density and moisture content. Avicel® PH microcrystalline cellulose (MCC) is most often used as a filler, disintegrant, flow aid, and dry binder for tablets and capsules. Avicel® PH-102 has a typical average particle size of 100 µm and moisture content between 3 and 5%. Avicel® PH-102 is primarily used for direct compression, and dry granulation/roller compaction. The particle size of Avicel® PH-102 provides good flow characteristics. When compressed, Avicel® PH MCC undergoes plastic deformation. The strength of MCC tablets results from hydrogen bonding between the plastically deformed, large surface area cellulose particles. MCC is recognized as the most compactable of any direct compression excipient.

Microcrystalline Cellulose is purified, partially depolymerized cellulose prepared by treating alpha cellulose obtained as a pulp from fibrous plant material with mineral acids. Several grades of Avicel® PH MCC are available varying in particle size distribution, density and moisture content. Avicel® PH microcrystalline cellulose (MCC) is most often used as a filler, disintegrant, flow aid, and dry binder for tablets and capsules. Avicel® PH-105 has a typical average particle size of 20 µm and moisture content of not more than 5%. Avicel® PH-105 is primarily used in small amounts (5-10%) with other Avicel® MCC grades, like Avicel® PH-102 and PH -101, to boost tensile strength of a tablet. Avicel® PH-105 has smallest particle size thus increasing cellulose surface area for hydrogen bonding resulting in most compactable of the Avicel® PH products.

Microcrystalline Cellulose is purified, partially depolymerized cellulose prepared by treating alpha cellulose obtained as a pulp from fibrous plant material with mineral acids. Several grades of Avicel® PH MCC are available varying in particle size distribution, density and moisture content. Avicel® PH microcrystalline cellulose (MCC) is most often used as a filler, disintegrant, flow aid, and dry binder for tablets and capsules. Avicel® PH-302 has a typical average particle size of 100 µm with a high bulk density of approximately 0.4 g/cc, compared to 0.3 g/cc for most other Avicel® grades. Avicel® PH-302 is primarily used for direct compression, and dry granulation/roller compaction. The high bulk density provides increased flowability resulting in improved blending characteristics and tablet uniformity. The high density also helps improve consistency and throughput of the capsule filling process.

Microcrystalline Cellulose is purified, partially depolymerized cellulose prepared by treating alpha cellulose obtained as a pulp from fibrous plant material with mineral acids. Several grades of Avicel® PH MCC are available varying in particle size distribution, density and moisture content. Microcrystalline cellulose (MCC) is most often used as a filler, flow aid, and dry binder for tablets and capsules. Endurance® VE-090 has a typical average particle size of 100 µm. It is primarily used for direct compression, and dry granulation/roller compaction for dietary supplement applications. The particle size of Endurance® VE-090 provides good flow characteristics and compression profiles.

Avicel® PH - 103 is a microcrystalline cellulose used in direct compression, dry granulation, and wet granulation technologies. It serves the healthcare and pharma markets, particularly in oral drug delivery and care solutions. This product is available in granule form.

Microcrystalline Cellulose is purified, partially depolymerized cellulose prepared by treating alpha cellulose obtained as a pulp from fibrous plant material with mineral acids. Several grades of Avicel® PH MCC are available varying in particle size distribution, density and moisture content. Avicel® PH microcrystalline cellulose (MCC) is most often used as a compression Aid, filler, flow aid, and dry binder for tablets and capsules. Avicel® PH-101 has a typical average particle size of 50 µm and moisture content between 3 and 5%. Avicel® PH-101 is primarily used for wet granulation, extrusion spherization and tablet compression. Avicel® PH MCC rapidly absorbs aqueous binder solution permitting faster addition of fluid as well as shorter wet massing time. At the same time, the water does not become bound water resulting in faster drying time and uniform granular properties.

Microcrystalline Cellulose is purified, partially depolymerized cellulose prepared by treating alpha cellulose obtained as a pulp from fibrous plant material with mineral acids. Several grades of Avicel® PH MCC are available varying in particle size distribution, density and moisture content. Avicel® PH microcrystalline cellulose (MCC) is most often used as a filler, disintegrant, flow aid, and dry binder for tablets and capsules. Avicel® PH-112 has a typical average particle size of 100 µm and lower moisture content of not more than 1.2%. Avicel® PH-112 is primarily used for direct compression, and dry granulation/roller compaction for moisture sensitive Active Ingredients (APIs). The particle size of Avicel® PH-112 provides good flow characteristics. When compressed, Avicel® PH MCC undergoes plastic deformation. The strength of MCC tablets results from hydrogen bonding between the plastically deformed, large surface area cellulose particles. MCC is recognized as the most compactable of any direct compression excipient.

Avicel® PH - 200 (Low Nitrite Grade) is a specialized grade of microcrystalline cellulose designed to support customers’ Nitrosamine Control Strategy. This grade extends our standard Avicel® PH 200 offering by providing reported Nitrite values on the Certificate of Analysis (CoA) for all delivered batches. The additional information enhances quality assurance for every batch. Nitrite specification on COA Is NMT 100 ppb

Avicel® PH - 113 composed of microcrystalline cellulose, finds application in tablet formulations. Manufactured using direct compression, dry granulation, and wet granulation techniques, it serves as a binder and compression aid. Derived from non-animal sources, it meets pharmaceutical and nutraceutical standards.

Microcrystalline Cellulose is purified, partially depolymerized cellulose prepared by treating alpha cellulose obtained as a pulp from fibrous plant material with mineral acids. Several grades of Avicel® PH MCC are available varying in particle size distribution, density and moisture content. Avicel® PH microcrystalline cellulose (MCC) is most often used as a filler, disintegrant, flow aid, and dry binder for tablets and capsules. Avicel® PH-102 SCG is specialized course grade primarily used for direct compression, and dry granulation/roller compaction

Microcrystalline Cellulose is purified, partially depolymerized cellulose prepared by treating alpha cellulose obtained as a pulp from fibrous plant material with mineral acids. Several grades of Avicel® PH MCC are available varying in particle size distribution, density and moisture content. Avicel® PH microcrystalline cellulose (MCC) is most often used as a filler, disintegrant, flow aid, and dry binder for tablets and capsules. Avicel® PH-200 has a typical average particle size of 200 µm and moisture content between 3 and 5%. Avicel® PH-200 is primarily used for direct compression, and dry granulation/roller compaction. Larger particle size of Avicel® PH-200 provides enhanced flow characteristics. When compressed, Avicel® PH MCC undergoes plastic deformation. The strength of MCC tablets results from hydrogen bonding between the plastically deformed, large surface area cellulose particles. MCC is recognized as the most compactable of any direct compression excipient.

Avicel® PH - 102 (Low Nitrite Grade) is a specialized grade of microcrystalline cellulose designed to support customers’ Nitrosamine Control Strategy. This grade extends our standard Avicel® PH 102 offering by providing reported Nitrite values on the Certificate of Analysis (CoA) for all delivered batches. The additional information enhances quality assurance for every batch. Nitrite specification on COA Is NMT 100 ppb

Avicel® PH - 101 (Low Nitrite Grade) is a specialized grade of microcrystalline cellulose designed to support customers’ Nitrosamine Control Strategy. This grade extends our standard Avicel® PH 101 offering by providing reported Nitrite values on the Certificate of Analysis (CoA) for all delivered batches. The additional information enhances quality assurance for every batch. Nitrite specification on COA Is NMT 100 ppb